中文简体
英语
西班牙语
德语
DR Diamond Resin Bond Wafering Blade
Product Description
Wafering blades have very thin cut Width,are recommended for precision cutting/...
Technical points of metallographic cutting machine:
After each use, cleaning and maintenance work should be done in time, and the deposits in the cutting room and the water tank should be cleaned regularly to ensure the smooth and clean cooling water.
2. It is strictly forbidden to use cracked or damaged metallographic cutting sheets for cutting work to ensure safety during the cutting process. (It is recommended to use the original cutting blade)
3. The coolant needs to be replaced regularly to prevent deterioration and failure and affect the cutting effect.
4. In the future work, each sliding part needs to be injected with lubricating oil frequently.
5. When replacing a new metallographic cutting blade in the middle, do not tighten the lock nut with too much force to prevent the saw blade from being disassembled or the cutting blade cracking.
6. If there is an abnormal sound during the cutting process, you should press the emergency stop button immediately and check the equipment. Before repairing or replacing accessories, cut off the power first and wait for the metallographic cutting sheet to stop completely.
7. If the equipment shakes and other faults, it should be stopped immediately to check and check the direction
(1) Is the cutting blade broken?
(2) Is the cutting speed too fast during the cutting process?
