When using a
metallographic grinding and polishing machine, it is necessary to prevent the sample from flying out. In this process, it is more important. If such a situation occurs, it is likely to cause some safety accidents. You can find a professional person to operate it yourself, and you should know what are the specific types. Steps. Generally, if you choose to find professional people to operate the equipment, there is no need to worry. There may be such problems. After all, these professional people will be relatively strict when they master the specific operation methods.
When using a metallographic grinding and polishing machine, care should also be taken to avoid new wear marks caused by excessive pressure. In terms of pressure setting, you can pay attention to it yourself. What kind of pressure should be more reasonable? There may be some differences in the pressure setting caused by different products. You cannot choose the same pressure. It is very likely that this will cause wear marks, which will result in poor polishing of the product.
When using a metallographic grinding and polishing machine, you should also be able to pay attention to avoid excessive temperature caused by continuous use for a long time. Some people choose to operate the equipment continuously for a long time, which is very likely to cause some troubles. For example, the temperature of the equipment will be too high. Basically, it is impossible to get a better operating experience, and it is also very likely that the equipment will be damaged. You can observe the temperature of the equipment yourself. If you find that the temperature is high, you can stop the equipment as soon as possible. Use, and you can also choose to use a cooling system for cooling treatment. The equipment will include a cooling system. After cooling, you can continue to use the equipment normally after a period of time.